Hem » GSON » Beställ idag Verktygsvagn Universal 1/4″ + 1/2″ 141 delar
Rea!
Beställ idag Verktygsvagn Universal 1/4″ + 1/2″ 141 delar
6 244,00 kr Det ursprungliga priset var: 6 244,00 kr.2 622,48 krDet nuvarande priset är: 2 622,48 kr.
Fri frakt vid beställningar över 999,00 kr
- Vi levererar din beställning snabbt och erbjuder fri frakt.
- 30 dagars returrätt och återbetalning
Säker betalning
Beskrivning
Portabel 141 delars verktygsväska i aluminium med teleskopiskt draghandtag och hjul.
Teknisk information
| Produkt: |
1/4″ + 1/2″ Universal Tool Trolley 141 delar |
| Storlek (BxLxH): |
470x375x200 mm |
| Vikt: |
14760 g |
| 1/2″ Dr.Sockets: |
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32 mm |
| 1/2″ Dr.Ratchet Handle 72 T 250 mm: |
1 st |
| 1/2″ Dr.Extension Bar: |
125, 250 mm |
| 1/2″ Dr. Sliding T-Handle 250 mm: |
1 st |
| 1/2″ Dr. Universal Joint: |
1 st |
| 1/4″ Dr.Sockets: |
4, 4,5, 5, 5,5, 6, 7, 8, 9, 10, 11, 12, 13 mm |
| 1/4″ Dr.Ratchet Handle 72 T 155 mm: |
1 st |
| 1/4″ Bits Adapter 6.35 mm: |
1 st |
| 1/4″ Dr.Extension Bar 50 mm: |
1 st |
| 1/4″ Dr. Universal Joint: |
1 st |
| Combination Wrench: |
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 22 mm |
| Measuring Tape 5 x 19 mm: |
1 st |
| Bit Set 33 pcs: |
1 st |
| Voltage Tester 250V: |
1 st |
| 1/4″ Mini Bit Ratchet Reversible 125 mm: |
1 st |
| Phillips Screwdrivers: |
PH0 x 75 mm, PH1 x 80 mm, PH1 x 100 mm, PH2 x 100 mm, PH2 x 125 mm |
| Slotted Screwdrivers: |
3 x 75 mm, 5 x 100 mm, 5 x 125 mm, 6 x 150 mm |
| 1/4″ Magnetic Bit Screwdriver: |
1 st |
| Punch & Chisel Set 5 pcs: |
Cold Chisel 13 x 10 x 150 mm, Cape Chisel 5 x 10 x 150 mm, Pin Punch 8 x 10 x 150 mm,Taper Punch 2 x 10 x 150 mm, Center Punch 3 x 10 x 150 mm |
| Ball Point Hex Key Set 9 pcs: |
1,5, 2, 2,5, 3, 4, 5, 6, 8, 10 mm |
| Torx Hex Key Set 9 pcs: |
T10, T15, T20, T25, T27, T30, T40, T45, T50 |
| Snap-Off Utility Knife: |
1 st |
| Mini Hacksaw 260 mm: |
1 st |
| Hacksaw Blades 150 mm: |
10 st |
| Adjustable Wrench 10″ 250 mm: |
1 st |
| Aluminium Level 300 mm: |
1 st |
| Vernier Caliper Range 0-150 mm: |
1 st |
| Diagonal Cutter 180 mm: |
1 st |
| Combination Pliers 200 mm: |
1 st |
| Long Nose Pliers 165 mm: |
1 st |
| Water Pump Pliers 250 mm: |
1 st |
| Concrete Nipper 250 mm: |
1 st |
| Machinist Hammer 500 g: |
1 st |
| Telescopic Magnetic Pick Up Tool 130-630 mm: |
1 st |
